This Retro-Fit system is a fully assembled, ready
drop in package to replace exiting E/One®
GP200, GP2000. The newly
upgraded design gives you all the power of FQ's
three grinder pumps.
Improved features include an easily adjusted
goose neck discharge, camlock cover system and
highmount junction/control box that elevates it
above the potential flood level in the event of a
power failure.E/One® original equipment panels
remain fully operational (including the manual
over-ride switch) when connected to the FQ unit.
Key Features:
- Fully assembled and ready to drop-in-place
- IP68 Waterproof junction box contains motor contactor and terminal strip
- Includes floats, piping and replacement cover
- Sealed 6 pin, quick-connector with 10’ cable lead plugs into existing E/One connector. Both old style and new hooded connectors available
- Heavy-duty cast iron anti-siphon check valve
- Original equipment manual over-ride switch remains operateable
- Stainless steel piping and discharge elbow is easily adjusted for proper engagement to the receiver
Technical Data:
- COVER--- EPOXY POWDER COATED STEEL
- JUNCTION BOX ---NEMA 4X
- DISCHARGE ELBOW---1-1/4” STAINLESS STEEL
- DISCHARGE PIPING---STAINLESS STEEL
- ANTI-SIPHON CHECK VALVE---HIGH TEMP NITRILE BALL
POLYPROPYLENE FLOATING BALL
HEAVY CAST IRON BODY
- IMPELLER ---300 SERIES S.S.
- MAX LIQUID TEMP ---140˚F/ 60˚C
- MAX STATOR TEMP --- 275˚F/ 135˚C
- THERMAL OVERLOAD---275˚F/ 135˚C
- POWER CORD TYPE --- SJOOW CORD WITH IP68 PANEL
WITH TYPE TC CORD TO PRE-INSTALLED CONNECTOR FOR INTERFACE TO E-ONE® UNIT
- MOTOR HOUSING ---CLASS 30 CAST IRON
- VOLUTE -- CLASS 30 CAST IRON
- SHAFT-- 420 SERIES STAINLESS STEEL
- HARDWARE --- 300 SERIES STAINLESS STEELL
- ORINGS --- BUNA N
- MECHANICAL SEAL --- UNITIZED SILICON CARBIDE
Performance:
| Model |
Hp |
Volt.
Ph |
FLA
amps |
Gal/Min @ Total Head in Feet |
Shut
off |
Weight
(lbs) |
| 20 |
40 |
60 |
80 |
100 |
120 |
| FC2-21C |
2 |
208~230/1 |
14.5 |
40 |
38 |
35 |
32 |
15 |
|
108 |
75 |
E/One® is a registered trademark of the Environment One Corporation and is not affiliated with F&Q Pumps.
