The FC series centrifugal grinder pumps easily handle residential, light commercial or industrial sanitary waste, reducing it to a fine slurry. The FC pump is designed for use in pressure sewer applications or any piping network.
Key Features:
- Oil-filled motor for maximum motor cooling and constant bearing lubrication
- On-Winding current and temperature-sensitive overload
- Pressed stator for precise shaft / bearing alignment, long life
- Shredding ring and grinder impeller are replaceable without dismantling pump or motor
- New 3-brade slicer cutter technology
- Double mechanical seal for a long life
- 300 Series Stainless Steel fasteners
Technical Data:
- DISCHARGE ---------------- 1.25” NPT with adapter
- LIQUID TEMPERATURE --- 120 degrees F (Continuous) 140 degrees F (Intermittent)
- MOTOR HOUSING--------- Cast Iron, ASTM A-48, Class 30
- CORD CAP ------------------- Cast Iron, ASTM A-48, Class 30
- VOLUTE ---------------------- Cast Iron, ASTM A-48, Class 30
- SEAL PLATE ----------------- Cast Iron, ASTM A-48, Class 30
- IMPELLER -------- Ductile Iron, 10 vane, Open with Pump-out Vanes, Dynamically Balanced
- SLICER-IMPELLER ----- Hardened 440C Stainless Steel 56-60 Rockwell C
- PLATE-SLICER --------- Hardened 440C Stainless Steel 56-60 Rockwell C
- SHAFT ----------------- 420 Stainless Steel
- SHAFT SEAL--- Mechanical
Main (Motor): Carbide – Rotating Face Silicon – Stationary Face
Secondary(Pump): Silicon – Rotating Face Silicon – Stationary Face
Buna-N - Elastomer
- BEARING (UPPER) ---- Single Row, Ball, Oil Lubricated
- BEARING (LOWER)---- Single Row, Ball, Oil Lubricated
- SLEEVE BEARING ----- Bronze with Oil Groove
- HARDWARE------------ 300 Series Stainless Steel
- O-RINGS -------------- Buna-N
- CORD ENTRY ---------- 30Ft Cord
Triple Sealed Design
Compression Grommet – Outer Jacket Seal
Epoxy Potted – Inner Conductor Seal
Butt Connector – Inner Wire Strand, Wicking Blockage
- MOTOR (SINGLE PHASE) --- 2 HP, 3450 RPM, 60 Hz
Dual-voltage, 200/230 volts
Overload Protec on in the Motor
Oil Filled, Class F
Capacitor Start/Capacitor Run
Performance:
| Model |
Hp |
Volt.
Ph |
FLA
amps |
Gal/Min @ Total Head in Feet |
Shut
off |
Weight
(lbs) |
| 20 |
40 |
60 |
80 |
100 |
120 |
| FC2-21C |
2 |
208~230/1 |
14.5 |
40 |
38 |
35 |
32 |
15 |
|
108 |
75 |
| FC2-21 |
2 |
208~230/1 |
14.5 |
40 |
38 |
35 |
32 |
15 |
|
108 |
75 |
| FC2-23 |
2 |
230/3 |
8.8 |
40 |
38 |
35 |
32 |
15 |
|
108 |
75 |
| FHC2-21C |
2 |
208~230/1 |
14.5 |
24 |
23 |
22 |
21 |
20 |
15 |
132 |
75 |
