33000GPH max flow, max head: 51ft, 5hp,230V/460V Dual voltage,three phases, 1750rpm, 13 Amps motor full load, 4" ANSI flange discharge, 30ft long water proof power cable.
Key Features:
- Up to 3" solids-handlign
- Class 30 cast iron construction
- 4” 125lb ANSI flange discharge
- Dual mechanical,300 series Stainless Steel Parts
- Oil-filled motor with automatic reset overload provides safe operation
- Ball bearing construction for long life
Technical Data:
-
DISCHARGE - 4" 125lb ANSI flange, Horizontal
-
SOLIDS HANDLING 3" (76 mm)
-
LIQUID TEMPERATURE 104 Degrees F. Contiuous, 140 Degrees F. Intermittent
-
MOTOR HOUSING Cast Iron
- VOLUTE Cast Iron
- SEAL PLATE Cast Iron
-
IMPELLER Cast Iron, 2-Vane, open, dynamically balanced for mechanical protection
-
SHAFT Corrosion resistance stainless steel, threaded design.
-
BEARING (UPPER & LOWER) Single Row, Ball, Oil Lubricated
-
HARDWARE 300 Series Stainless Steel
-
SQUARE RINGS Buna-N
-
POWER CORD 30ft water proof, bare leads
-
DUAL MECHANICAL SEALS:
Stainless steel metal parts, BUNA-N elastomers
Upper Seal: Carbon vs Ceramic
Lower Seal: Silicon Carbide vs Silicon Carbide
-
MOTOR (THREE PHASES)
1750 RPM, 60Hz, 208-230/460 Volts, 4 Pole
Build-in Thermal Protector with automatic reset.
Oil Filled, Class B
-
SIZE 17.6" X 17" X 26"
Performance:
Model |
Hp |
Volt.
Ph |
FLA
amps |
Gal/Min @ Total Head in Feet |
Shut
off |
Weight
(lbs) |
5 |
10 |
20 |
30 |
40 |
45 |
100WQ2.2-4P |
3 |
230/460/3 |
9.6/4.8 |
385 |
350 |
285 |
180 |
25 |
|
42 |
230 |
100WQ3.7-4P |
5 |
230/460/3 |
13/6.5 |
520 |
475 |
390 |
290 |
175 |
110 |
51 |
250 |