20000GPH max flow, max head: 72ft, 2hp,208~230V,single phase, 3450rpm, 14.4 Amps motor full load, 3" discharge, 30ft long water proof power cable.
Key Features:
- Up to 2" solids-handlign
- Class 30 cast iron construction
- 3”NPT discharge, Vertical
- 300 series Stainless Steel Parts
- Oil-filled motor with automatic reset overload provides safe operation
- Ball bearing construction for long life
Technical Data:
-
DISCHARGE - 3" NPT. Vertical
-
SOLIDS HANDLING 2" (51mm)
-
LIQUID TEMPERATURE 104 Degrees F. Contiuous, 140 Degrees F. Intermittent
-
MOTOR HOUSING Cast Iron
- VOLUTE Cast Iron
- SEAL PLATE Cast Iron
-
IMPELLER Cast Iron, Close, Single Channel, dynamically balanced for mechanical protection
-
SHAFT Corrosion resistance stainless steel, threaded design.
-
BEARING (UPPER & LOWER) Single Row, Ball, Oil Lubricated
-
HARDWARE 300 Series Stainless Steel
-
SQUARE RINGS Buna-N
-
POWER CORD 30ft Cord with pressure grommet for sealing and strain relief. U/L and CSA listed 14AWG Type SJTOW
-
SINGLE MECHANICAL SEALS:
Stainless steel metal parts, BUNA-N elastomers
Silicon Carbide vs Silicon Carbide
-
MOTOR (SINGLE PHASE and THREE PHASES)
Single Phase: 3450 RPM, 60Hz, 208/230 Volts, 4 Pole
Includes Overload Protection In The Motor.
Oil Filled, Class B
Permanent Split Capacitor
-
SIZE 12.8" X 8.5" X 20.3"
Performance:
| Model |
Hp |
Volt.
Ph |
FLA
amps |
Gal/Min @ Total Head in Feet |
Shut
off |
Weight
(lbs) |
| 10 |
20 |
30 |
40 |
50 |
60 |
| 80WQ20-21 |
2 |
208-230/1 |
4.4/13.1 |
320 |
280 |
230 |
150 |
75 |
40 |
72 |
92 |
| 80WQ20-23 |
2 |
208-230/3 |
8.5/7.7 |
320 |
280 |
230 |
150 |
75 |
40 |
72 |
92 |
| 80WQ30-23 |
3 |
208-230/3 |
10.4/9.0 |
330 |
300 |
260 |
220 |
170 |
120 |
95 |
95 |
